The E48 has full blade pitch control and ASC (Active Stall Control). ASC offers both the advantages of pitch-controlled blades and the stall effect, used by classic stall-regulated wind turbines. Due to the pitch-controlled blades, the rated power level can be tuned precisely, eliminating effects of differences in air density, blade-surface contamination etc. This way, the uncertainties in the rated power level can be avoided. In addition, the E48 has a double speed generator. In wind speeds up to 7 m/s, a 120kw winding is in operation, assuring better performance in lighter winds, and with higher efficiency. Above 7 m/s, the 600kw winding is employed. The result is optimum performance and increased production throughout the wind speed range.

World Wide Wind Turbines (WWWT) foresees delivery at a minimum of 14-16 months at the present time. Produced in the USA, this wtg is a license product of the Turbowinds T600, with a generator with two windings, also for 120kW. Technically and productionwise, this wtg does have some advantages over other types in this range. If your wind farm project is located in the United States, you will be better off contacting Enertech directly. In such case, we can hardly have any added value, unless you have difficulties to get through. In all other cases and for other locations, please contact us to create a good sourcing plan and proposal, since acquiring this wtg-type requires special attention. WWWT is well positioned to assist in a successful procurement process.